Power Capacitor

HT / HV Power Capacitor

( High Tension / High Voltage )

We are Manufacturer & Exporter of Medium Voltage / High Voltage, MT / HT Power Capacitor.This product is used to maintain Power Factor at Medium Voltage or High Voltage level.

PRODUCT RANGE

Rated Out Put: Upto 1200 kVAR

Rated Voltage: 1 kV to 400 kV class

Rated Frequency: 50 Hz / 60 Hz

Connection: Single phase & Three Phase

Installation: Indoor / outdoor, vertical / horizontal

Protection: Internal / External fuse

** We also provide capacitor as per customer / system requirements

MV / HV Capacitor design with recent trends & technology with imported raw material.

Construction of MV/HV capacitor generally Single (1) phase or three (3) phase with single/double/triple bushing termination in all film design. The capacitor is manufactured by using electrical grade double side hazy biaxially oriented PP film interleaved with soft annealed high purity aluminum foil as its electrode. The capacitor is impregnated under high vacuum with electrical grade non-PCB insulating fluid.

All capacitor either internal fuse or external fuse assembly with permanent internal connected discharge device. MV/HV capacitors comply with requirements of IS 13925, IEC 60871, ANSI IEEE STD 18.

Features :

  • Imported electrical grade double side hazy biaxially oriented PP film as a dielectric
  • 99.9% pure aluminum foil as an electrode
  • Capacitor manufactured under high vacuum plant to avoid impurities
  • Compliance with requirements of IS 13925, IEC 60871, ANSI IEEE STD 18
  • Less losses.
  • Thirty years design life.
  • Hermitically sealed compact design
  • Anti UV protection based coated paint.
  • Adaptable temperature -24 to +55
  • Special design construction for compliance to high seismic requirements.
  • Porcelain bushing glazed for high strength and duration.

Application :

  • Increase supply efficiency
  • Improve power quality
  • Reduce cost of electricity
  • Reduction in burden on transformer
  • Decreasing Voltage drop

Technical Data Sheet :

Sr. No. Particulars Technical Data
1 Manufacturer Details & Make SHARDA Electronics & Co.
Plot No. J-32 MIDC Kupwad Sangli, 416436, Maharashtra, India.
Make : SHARDA
2 Reference IS 13925-2012, IEC-60871:2005 ANSI –IEEE Std.18
3 Rated Output (kVAR) Up to 1200 kVAR
4 Rated Bank Output Up to 50 MVAR
5 Rated Voltage (kV) 1.1 kV  to 400  kV  AC
6 Temperature (˚C) 50 ˚C
7 Frequency (Hz) 50 / 60 Hz
8 Connection Single (1Ph.) / Three
Phase (3 Ph.),Star / Delta
9 Protection Internal / External Fuse
10 Discharge  Resistors Internal Discharge Resistors Provided
11 Maximum Voltage 110% of  Rated  Voltage
12 Maximum continues over current 130% Rated Current
13 Inrush Current 100 Times Rated  Current
14 Humidity Less Than 95% RH
15 Maximum Altitude 1000 Meter  Above  Sea Level
16 Type of Foil Material Aluminum Foil (99.9% Purity)
17 Impregnant NPCB PXE Oil
18 Type  of Dielectric APP
19 Power Losses/ kVAR  0.11  Watts / kVAR
20 Discharge Time Within 10 Minutes as per IS
21 Installation Indoor / Outdoor, H. T.  Panel /Floor  Mounted
22 Life Of  Capacitor More Than  2 Lakh Hours
23 Insulation Level Basic Insulation Level of bank kV (system) 12 024 036 72.5 123 145
Power Frequency withstand Voltage kV (RMS) 28 050 070 140 185 230
1.2/50 ms. Impulse Withstand Voltage kV (Peak) 75 125 170 325 450 500